Tsurumi’s small dewatering pump, the LB sequence, is designed for functions where house is tight, significantly building. Secured by pressure gauge ไฮ ด รอ ลิ ค or chain, an LB can be used in purposes which contain narrow pipes, small tanks, deep pits and in remote places which may be difficult to achieve with larger equipment. The LB model has a completely symmetrical design with no protruding parts, allowing it to be lowered to unknown depths with none risk of snagging. With a diameter of only 187 mm, the pump’s round cross-section even matches into smaller filter pipes. There can also be เพรสเชอร์เกจวัดแรงดันน้ำ with a water level sensor which is just a few millimetres longer. The pump then controls itself mechanically, switching on or off depending on the water stage. The LB presses water with filth particles as a lot as 6 mm in size by way of the housing, permitting optimal cooling of the motor. The models in the collection pump 225–440 l/minute and to a most of 17.5 m. The smallest mannequin weighs around 10 kg dry, the largest around 30 kg.
Share